52 Week Challenge: #10 DIY Screenprint Dodger Tee

Sunday, April 1

Chris and I are going to a Dodgers vs. Angels game next week for opening day. I don't know much about baseball, I usually just fill up on food, sun, and beer. I just cheer when everyone else does. Chris has his own dodger gear. But I wanted something to wear to support the team.

I've been seeing so many awesome textile diy's around lately: A Beautiful Mess' hand stamped dress, a bleach painting tutorial by Lune via A Beautiful Mess. I thought I'd give this screenprint diy, that I saw over at Manzanita, here's my take on this awesome and totally easy project. Here's what you need:
Shirt (thrifted), modge podge, fabric paint (this was my first time using Martha Stewart's all-purpose acrylic paint and it's amazing!), design, cardboard piece, embroidery hoop, nylon or panty-hose fabric, paintbrush, and permanent pen.
1. Create a design for your screenprint. I started with something simple since it was my first time using this method. Later, I did a more elaborate design for the front of the shirt, after I did this first heart as practice. Make sure that your that your embroidery hoop is large enough for your design.
2. Stretch the nylon over the hoop so that it is taut.
3. Trace your design using a a permanent pen.
4. Using Mod Podge, paint the "negative space", or, the space that you do not want to be painted.
5. Fill in the whole area, making sure there are no holes or gaps. I was obsessive about this because I didn't want the paint to seep through. Let dry completely. It took about 3 hours for this little one to dry.
6. Lay the hoop flat on the shirt and position where you want the design to be, and place a piece of cardboard beneath the area so that the paint doesn't bleed through the back. Squirt a generous amount of paint over the design.
7. Use the cardboard to spread the paint over evenly.
8. Carefully lift the hoop off the shirt and voila!
9. Let the paint dry completely before wearing.

I also did the front part of the shirt. I made the LA symbol inside a heart. I thought it came out cute and I'm excited to wear it to the game! Go Dodgers!

A few people have commented asking me how I made the design on the front. Here's a picture of the screen I made to create it. I painted Mod Podge on the outside of the heart, and the block letters, basically anywhere I didn't want the paint to go. So you kinda have to think in reverse. Hope this helps!

262 comments:

  1. Hi Lauren,
    I love this DIY session! It looks great and so inspiring!!
    Thank you so much, love your blog too, just became a follower!
    Jules d+o xo

    ReplyDelete
  2. Wow, I really love this! I might have to try this next! Thanks for sharing :)

    ReplyDelete
  3. I need to do this!!!! This is cute and looks so simple! I looooove Mod Podge! Can't live without the stuff!!!

    xoxo, your newest follower!
    Natalie

    ReplyDelete
    Replies
    1. mod podge is the same as gesso can i use for this??? thanks

      Delete
    2. No! Gesso is acrylic primer and will ruin it.

      Delete
    3. I LOVE this idea!! I used to do screen printing in high school-- & this is a nice easy & inexpensive way to do it!! thanks :)
      katie

      Delete
  4. What an adorable design. I'm trying to get the nerve up to try screen printing. This method seems super easy to do. Thanks for the tutorial.

    ReplyDelete
  5. I can't get over this! Need to try immediately!

    ReplyDelete
  6. Great idea! How does it wash? I'd worry the paint would peel off the shirt since it's water based.

    ReplyDelete
    Replies
    1. Be sure to buy FABRIC paint. If you can't find that, acrylic paint and fabric medium mixed together will do the trick (Mixing amounts should be on the bottle). As long as you heat set it after it's completely dry, the paint should hold up much like a decal or screen printed shirt from the store.

      Hope this helps.
      Missy

      Delete
  7. you can do this with mod podge?! i may need to start screen printing everything i own...
    I'm also curious like anonymous above me about how this holds up to washing?

    ReplyDelete
    Replies
    1. Good question! I haven't actually washed it yet, haha. But when I do, I will probably hand wash it. The paint is supposed to be all-purpose, and I've seen it used on fabric before, so I'm hoping that it won't crack or peel off :) I will update my post after I wash it!

      Delete
    2. I've painted a hand full of tshirts and if you use proper paints it washes pretty good. I do iron my designs after the paint is dry tho, using some wax paper or simply a cloth over the design so the iron doesnt ruin the paint. Afterwards just wash on the mashine without problem (dont use high temperatures tho) and dont use the dryer, that would ruin the design and make the paint crack.
      Ty for the tut, i had never thought of using mod podge to create a permanent stencil, its a great idea :)

      Delete
    3. If you use fabric paint you should be OK, I stenciled a shirt for hubby almost two years ago, with only a thiiin layer of fabric paint and after two years of washing and drying normally it still looks pretty much like the day I did it. It's actually faded LESS than most of his regular tees. :)

      Delete
    4. you can use any acrylic paint and mix it with fabric medium (found in paint sections at stores) and it should hold up. my high school art class used this technique

      Delete
  8. Fantastic! And I love the color combo you chose.

    ReplyDelete
  9. how have i not read your blog before. i love it, i have wanted to do this for a while you make it look so easy xxxx

    ReplyDelete
  10. This looks so good, and very easy too, I really want to try it!

    ReplyDelete
  11. I have been meaning to do this with a few thrifted napkins that I have. Thank you for the inspiration!
    Really cute shirt.

    ReplyDelete
  12. Beautiful! Feminine sports wear can be tough to find and is usually crazy expensive. What a great idea!

    I'd love to see how you did the more complicated pattern - withe the negative space inside the heart.

    ReplyDelete
  13. This is so great! I've been wanting to try screen printing for a while, but I just didn't want to invest in all the tools. This looks so easy and inexpensive. I'll be trying this very soon - maybe with my logo. Thanks for the tutorial!

    ReplyDelete
  14. this is great! Isn't it so easy? I really like the mini heart on the back. Thanks for shouting out to manzanita<3

    ReplyDelete
  15. Looove this. Thank you. This is another way of doing printing that i hadn't considered. So cool. Gotta try this

    ReplyDelete
  16. That is beautifully executed! I must MUST must do this one day, when I don't have toddler paws climbing up my leg! ;)

    ReplyDelete
  17. Why didn't I think of that?! You are a genius!

    ReplyDelete
  18. I may be slow or something but please can you explain how to put the letters inside? This looks so easy to do. I love it.

    ReplyDelete
    Replies
    1. I added an another image image and a brief explaination to answer your question. Hope this helps!

      Delete
  19. you totally ripped off this tutorial

    ReplyDelete
    Replies
    1. She gave credit : that means she didn't rip it off ... She added her personal touch to the original idea

      Delete
  20. Loved this! Thanks so much for posting. That blue is my faaaaaavorite!

    And P.S. I don't see how you ripped off this tutorial if you linked blogs that gave you inspiration. Anonymous posters are such bullies!!!

    ReplyDelete
  21. Thanks Amanda! I tried my best to give credit to the other bloggers who were so creative to think of this great idea!!

    ReplyDelete
  22. Okay just one quick question, can you reuse the nylon on another shirt or do you have to redo the design on a new piece?

    ReplyDelete
    Replies
    1. I'm not sure, but another reader commented saying that she used the screen to make more than one print :)

      Delete
    2. I believe when you use modge podge for the "negative" space, you CAN reuse the "stencil"...just make sure you wash out the paint you previously used. Just in case you want to use a different color. :)

      Delete
    3. This comment has been removed by the author.

      Delete
  23. Love it! We're big Dodgers fans here so I'm going to have to do one like this but in Dodger blue! :) Thanks for the great tut!

    ReplyDelete
  24. Great way for my three wee ones to get those U of M shirts they've been wanting!

    ReplyDelete
  25. Wonderful idea! I would love to know where you got the t shirt. It looks like the perfect fit!

    ReplyDelete
  26. Love your DIY hun, kisses from Lima!

    www.carlasbreakfastime.com

    ReplyDelete
  27. This is really neat! Just another idea for your letters inside the heart. Cut out your design in freezer paper and then iron the freezer paper with glossy paper side onto the shirt with some fabric over the top of paper (between your iron and the paper) and something under the front of your shirt. The paper will stick to the fabric. Then screen print as normal. When everything is dry slowly lift the corners of the freezer paper and tada you have your image!

    ReplyDelete
    Replies
    1. Thank you for this! I soooo need to get me some freezer paper. There are so many uses. Great idea!

      Delete
  28. To heat set acrylic paint on fabric: when paint is completely dry, cover design area with pressing cloth (I like using a flour sack dishtowel); heat DRY iron to cotton setting; using press & lift motion, press each area for 20seconds; repeat until entire design has been set. If pressing cloth starts to scorch, reduce iron heat a little. Never slide the iron, and don't worry about overlapping the last spot ironed--you want to make sure you dont miss any!

    ReplyDelete
    Replies
    1. Thank you so much! The directions on the bottle are so vague. I will definitely try this!

      Delete
    2. I found a cool way to make your screen printing designs look sort of vintage-y... When the paint is almost dry but still a bit tacky press the iron over it with no pressing cloth, just straight iron on the tacky paint. It will sizzle a bit, only do it for a second or two. Then lift up your iron and wipe clean and press somewhere else. It gives it a cool, worn in sort of look! I made my kiddos some vintage Mario mushroom shirts and they turned out super cool!

      Delete
  29. Does the paint come off after you wash it? I'm thinking of doing this on onesies if the paint stays.

    ReplyDelete
    Replies
    1. I haven't actually washed my shirt because I wore it once to the game. But from what I understand is that with the Martha Stewart All-Purpose paint is permanent. The directions on the bottle are not detailed , but I looked it up and you are suppose to iron it on low to set the design. Hope this helps!

      Delete
  30. Replies
    1. Thank you! i got the idea from a few other awesome bloggers!

      Delete
  31. I LOVE this!! Quick question, do you need to let the Mod Podge dry first before you apply the paint?

    ReplyDelete
    Replies
    1. Yes, let the Mod Podge dry for at least 2 hours :) then it will be waterproof.

      Delete
  32. Love this! I had never thought to screen print with a nylon! going to have to try. I have all of the other screen printing materials/fillers, etc. but never enough screens! a nylon might just answer my problems!
    xo dana
    thewonderforest.com

    ReplyDelete
    Replies
    1. Definitely. I took a screen painting class in my undergraduate, and the materials were so ridiculously overpriced! This is a great alternative if your not trying to achieve much detail. Thanks! By the way, I LOVE your blog...

      Delete
  33. i have also heard of using tulle instead of hose

    ReplyDelete
    Replies
    1. Great idea! I had to actually go out and buy a pair of panty hose, because I never wear them, and they were like $7!

      Delete
    2. I picked up a pair of knee highs at walmart for 33c and after I had it on the ring I cut one side. But I will be trying tulle next... I have Tons that I use for tutus and hairbows for my daughters! Awesome idea! And thanks Lauren... My husband and kids love their shirts! :)

      Delete
  34. I want to know if I can use the nylon again, how to wash it to use it more than once?????

    Ana María

    ReplyDelete
    Replies
    1. Once the mod podge is dry, it can't be washed or removed. But one reader did comment and say that she used the same screen to make more than one print.

      Delete
  35. Genius!! I love this and I must try it out - thanks for sharing!!

    ReplyDelete
  36. This is genious! I will use this as soon as I can :)

    ReplyDelete
  37. I love the tee! looks awesome!

    ReplyDelete
  38. This is too cool!! I'm definitely going to try this out :)

    ReplyDelete
  39. Love this! Featured it on my blog this week so feel free to come over and grab a button! :)

    http://enjoyerofgrace.blogspot.com/p/grab-button.html

    ReplyDelete
    Replies
    1. Thank you for sharing my post:) Your blog is great! new follower!

      Delete
  40. This is wonderful! My students and I are going to forensics nationals in a month and a half, and they wanted to do t-shirts. Now we can do them without spending a fortune at an actual screenprinting shop!

    ReplyDelete
  41. could you do this by just cutting out what you want with cardboard instead of the nylon? or do you think that wouldn't really work?

    ReplyDelete
    Replies
    1. I'm not sure. THe nylon allows you to spread the paint evenly and smoothly. THe cardboard may create a lip. But other readers have commented with other great ideas here, like using contact paper instead of Mod Podge. It just takes some experimenting :)

      Delete
  42. Great tutorial! I'm so excited to try this!

    ReplyDelete
  43. I successfully reused my screen a couple times right in a row, while the paint was still wet. I tried rinsing it out and it's drying now... will let you know how it turns out!

    ReplyDelete
    Replies
    1. Nice job! Thank you for this, I will definitely try this, especially if I want to make a large amount of designs!

      Delete
    2. Washing it worked just fine- I was super careful though and really only worried about getting the paint out of the nylon and not off of the ModPodge. I wonder if Outdoor ModPodge would be better if you intend to wash and reuse it a lot?

      At any rate, reusing it later worked BEAUTIFULLY.

      Delete
  44. Where did you get your jacket from? i have been looking for one just like that for sooo long! oh and i love the design :)
    ill check back just in case you answered. thanks!

    ReplyDelete
    Replies
    1. Her jacket looks just like one I found in the Kohls junior section...

      Delete
    2. I got it from this little hole in the wall store by my house. It was inexpensive and I've seen many like it!

      Delete
  45. I love your tutorial! Looks fairly easy too, I will for sure give it a try. :))

    As to washing - I have used all purpose acrylic paint to make my own tags, basically by stamping small pieces of white fabric with regular stamps and acrylic paint, then pressing the print with iron to "set" the paint, (I used parchment paper on top of the print, so the paint wouldn't stick to the iron, but I've read that it's not even necessary). I have washed the garment twice already, in hot water, using laundry detergent & fabric softner and drying it on the hottest setting, and the print still looks perfect as it did the day I made it. So I'm guessing that your project will survive the washing just as well. It might depend on the type of paint we use, but as far as I have played around, it works! :)

    ReplyDelete
  46. Looks so simple. Now to find Modge Podge in Hong Kong! The DIY challenge continues.

    ReplyDelete
    Replies
    1. I have never used 'Mod Podge' but did make my own with elmers glue and water 50/50 in a jar and shake. It worked Great for some paper labels on glass jars. Haven't used it for this yet though! Good luck.

      Delete
    2. Great idea! It's basically just glue anyways:)

      Delete
  47. a nylon--eureka! what a great idea. i can definitely find those here (in shanghai). . and there has to be an embroidery hoop around. . .

    similar to Katherine, above, not sure if I'll find modpodge, but I may try using some acrylic medium and see if that does the trick. . . . love the extra paint-setting tips in the comments too. thanks!

    ReplyDelete
  48. Would this work with freezer paper?

    ReplyDelete
    Replies
    1. I used freezer paper yesterday, and it worked wonderfully! I just used a foam brush and "dabbed" the paint into the space on the shirt, then I smoothed it over with the brush. You definitely want a piece of cardboard or something between the layers of the shirt because the fabric paint tends to bleed through a little bit.

      Delete
    2. Thank you for sharing :) great suggestion!

      Delete
  49. Does it matter if u use mod podge gloss instead of matte?

    ReplyDelete
    Replies
    1. I'm not positive, but I would assume that glossy Mod Podge would work just fine! Hope that helps!

      Delete
  50. Love this, thanks so much for sharing!

    ReplyDelete
  51. So cute! Thanks for showing the DIY!

    mybillie.blogspot.com

    ReplyDelete
  52. really gorgeous and simple! I love it!

    ReplyDelete
  53. Wow, this is fantastic! I found your DIY via Kyla Roma and I'm so excited to check out the rest of your blog!

    ReplyDelete
  54. I just finished this project and it turned out great! As a very slight twist, I used a little less paint than you did and sort of scraped the excess off before I removed the screen. This created a more vintage feel to the design. Thank you for a perfect tutorial!

    ReplyDelete
  55. I have a silkscreen that I bought several years ago and use quite often. I cut my stencils with that out of contact paper (I think that's what it's called...) I can draw and cut out my design from it easily, and it sticks right to the screen. Then, after I'm done printing, it just peels off my screen and I can wash it an reuse it many, many times. This would probably work with this design as well. Just remember if you want lettering to cut it out backwards.

    ReplyDelete
    Replies
    1. Great Idea! I'll definitely have to try this! :) Thank you for sharing!

      Delete
  56. thank you so much for the tutorial! i've seen a few on pinterest but didn't quite understand them. this is the easiest and most useful one i've read. thanks a bunch!

    ReplyDelete
  57. Just came across this project on Pinterest it is definately one I'm gonna have to try! Thanks for sharing!

    ReplyDelete
  58. This is such a great Idea, I've been looking into buying some screen printing supplies but was shocked at the high prices!I recently bought an embroidery hoop for a buck at a thrift store that would be perfect :) I can't wait to try this out. Have a lovely day,
    Izzy
    http://jar-of-feathers.blogspot.com

    ReplyDelete
  59. I was wondering how you got LA done with the Mod Podge so nicely. Doesn't look at of lines or anything. Did you use a smaller paint brush?

    ReplyDelete
    Replies
    1. Yes, I used a small paint brush. And it helped that my design was simple.

      Delete
  60. Been dying to try this technique.. thanks for making it look easy and totally approachable!

    ~Amy
    www.LadyMockingbird.com

    ReplyDelete
  61. Manzanita (the source you linked) actually got her instructions from this video, which may help some of the people who are here asking questions. And yes, you need to heat set fabric paint for it to last.
    http://www.youtube.com/watch?v=LkZh6p8OVfI&feature=relmfu

    ReplyDelete
  62. I actually work at a screen printer and this is really really cool. Just some tips about caring for your shirt...we usually suggest that you wash it inside out on cold and either hang to dry or use low heat in the dryer...but turning it inside out really helps to save the ink. Thanks for this tutorial...I've wanted to get shirts done, but it's super expensive just for 1-5. Also, like someone else said, you should be able to use the same nylon for another print while the paint is still wet.

    ReplyDelete
    Replies
    1. Thank you for all this information! I'm sure it will be very helpful! :)

      Delete
  63. Since I seem to be heavily involved in mod podging the world, guess I have to try this next. What a great idea.

    ReplyDelete
  64. Brilliant tutorial - thank you! I'm off to have a go myself :o) Bye xx

    ReplyDelete
  65. This is so clever. I love that you use pantyhose & Mod Podge & the look you got is stunning.

    ReplyDelete
  66. Does it have to be fabric paint? or will regular acrylic paint work as well?

    ReplyDelete
    Replies
    1. She used acrylic - all purpose paint

      Delete
  67. Will the paint clean off the pantyhose easily for multiple projects?

    ReplyDelete
    Replies
    1. I did not try and wash it off myself, but other readers commented saying that they used their screen more than once. Hope that helps! :)

      Delete
    2. Yes, you can wash the paint off and reuse the stencil. I just made 5 shirts today using the same stencil. Just make sure you rinse it right after you used it and let it dry completely before you use it again.

      Delete
  68. so i live in the city where bands tees are non-trackable, and if you want one, you make one
    i've been researching printing technics for a while, and this one, my fair lady, is the BEST one
    i think we have a winner

    ReplyDelete
  69. Any update on if it holds after a wash?

    ReplyDelete
  70. Hi Hi Lauren, First of all thanks for these nice DIY printing. Its looking very!!!!!!!!!!!! Nice and beautiful.My wife is fashion designer. When she design a shirt to follow your method. She win the best performance award.

    TShirt manufacturers

    ReplyDelete
  71. Update on washing?

    ReplyDelete
  72. Where have you been all my life??? :p
    I've been thinking of silkscreen shirts but on leggings, so this method really helps me come up with a project.

    Thanks!

    Diwata

    ReplyDelete
  73. This is awesome! I will be making shirts for my husbands business now! Being a new business and all we needed low budget and this could be Low budget without looking it! And as for me, I think I see some leopard print coming on!

    ReplyDelete
  74. I don't have an embroidery hoop; are there any alternatives?

    ReplyDelete
  75. Hey, I tried this method and it worked great, except that the paint was really bubbly when I lifted the hoop. Your close up picture of the small heart looks a little bubbly too, does it fix itself during the drying, or did you do something different? Any suggestions? Thanks for the tutorial by the way!

    ReplyDelete
  76. Amazing idea! I dont think ive ever done a DIY project, but im going to try this.
    Can you suggest a place on line to for stencils and cute lettering like what you used? If i tried to freehand even a heart it would look like a blob!

    ReplyDelete
    Replies
    1. Literally just google "stencils." Not that hard.

      Delete
  77. Wow I really love this, I found it on Pinterest, this is super great!
    Thanks for sharing!
    -Your newest follower :)

    ReplyDelete
  78. Thank you ! i was wondering how to make this work.. the modge podge on the hose is great ! & cheap ! TYVM

    ReplyDelete
  79. Brilliant work, the prints look great!

    ReplyDelete
  80. I made an old english D version of this shirt and wore it to a game this week. It looks really cute and definitely doesn't give a "I made this myself" vibe that my DIY projects tend to normally give. Thanks for the inspiration.

    ReplyDelete
  81. Hi Lauren! Got inspired by your blog! Just recently been into screen printing and getting the hang of it. Thanks for sharing this. Here's to hoping I might post something soon too!

    ReplyDelete
  82. Great tutorial - thanks and your tee turned out so cute! I have this linked to my screen printing DIY post as well today, for inspiration!

    ReplyDelete
  83. How did you get the design so crisp? Love this tutorial, it was super easy, my only complaint is that it looks like the paint bled a little. Any advice???? oh, I used, sheer fabric and fabric paint.

    ReplyDelete
  84. found this on pinterest just now....awesome diy..the t-shirt looks so pretty n cute...thanks for sharing!

    ReplyDelete
  85. I just did the little heart on the back of shirt.. letting it dry overnight and then going to do the front.. can't believe how cute and easy it is.. Thanks for posting this..

    ReplyDelete
  86. You are simple awesome. I couldn't have thought of doing it this way.

    ReplyDelete
  87. This is so cool and simple. Thank you! If using multiple colors do you let the first color dry first?

    ReplyDelete
  88. Thank you so very much for this! I am a Girl Scout leader and our troop is making GS pull-string backbacks in a few days. I have been looking all over the internet looking for exactly this! Now I'm off to the craft store to get the supplies for this. I have 12 backpacks to prep with 5 inch GS letters so the girls can customize them with their own fabric paint pictures. This was incredibly helpful. Thank you again. I really appreciate the time you took to put this on the internet for everyone!

    ReplyDelete
  89. I made the screen today. No joke, you have to wait a long time for it to dry completely. It took 2 hours for mine to dry. After an hour, I put it infront of a fan. My prints are done.

    ReplyDelete
  90. I have been researching various fabric painting methods the last few weeks. I tried my hand the first time the other night with stenciling on a shirt. I started very easy with a soccer ball. Turned out great. I am now ready to add to that shirt with a 2nd color & glitter & will also add rhinestones once all is dry.

    I have been fascinated by the screen printing technique, though, but the supplies to do it are outrageously priced! So, this tutorial is FANTASTIC!!! I think I could handle modge podgeing a screen much quicker & more precise than an exacto knife to cardstock or freezer paper for a stencil. ~Kim

    ReplyDelete
  91. Thanks for the post! I just used your tutorial to make shirts for the walk to end alzheimer's that I'm doing next weekend. We'll see how they turn out :)

    ReplyDelete
  92. Awesome idea!! Love this! Thanks for sharing! :-)

    ReplyDelete
  93. I really like these long sleeve cotton shirts from Soffe, they are versatile and easily worn in many situations. Sometimes I wear these as layering with an outer short sleeve shirt, or I can wear these with some sweats when I'm at home just relaxing or even for light workouts.

    One note I would like to make..if you like your shirts worn with a little breathing room, I recommend you buy one size up. I normally wear Large, but my instincts told me to go with X-large. When the shirts arrived, the X-large felt roomy and cormfortble(which meant a large would've been slightly snug).

    The navy color I got looks good. The material is neither too thick nor too thin, just right for these type of shirts. It's also 100% cotton, which is what I prefer. Lastly, these shirts are priced reasonbly(under eight bucks each).

    ReplyDelete
  94. Ironing AFTER it dries would probably help seal in the design. In my college screen printing class the teacher told us never to use fabric softener when washing screen printed clothes as it causes the design to crack, so keep that in mind as well! Very cool tutorial.

    ReplyDelete
  95. great tutorial, thanks for sharing :) pics of my first try here
    http://abimakes.blogspot.co.uk/2012/11/pva-glue-screen-printing.html

    ReplyDelete
  96. I love the way you explain it. its really amazing post. I initially found your blog a week or so ago, and I want to subscribe to your RSS feed.

    ReplyDelete
  97. OMG that's freaking easy genius! Thanks for this! I'll have to favorite to come back to it when I do my kids shirts!

    ReplyDelete
  98. The next thing to think about is just how much pressure you would like the gay sizegenetics therapist to use on you. Different practitioners have different styles when they perform an erotic gay sizegenetics. You must communicate with your therapist so make will know exactly what you would like in an erotic gay sizegenetics. You may ask your gay sizegenetics therapist what their style it really is and whether or not they are adapt it in your needs and desires. At any time you contain a pressure level you find very enjoyable, make sure you mention this whenever you book the appointment with your sizegenetics.
    http://buysizegeneticsonline.tumblr.com/

    ReplyDelete
  99. Hi Lauren. Thanks for your tutorial. I followed it to make a Christmas t-shirt http://thoughtsfromplac.es/post/37724055307/ho-ho-ho-t-shirt

    ReplyDelete
  100. Great idea! It would be perfect for a tote bag as well!

    ReplyDelete
  101. I love this idea!! So clever and perfect for Valentine's Day DIY project! I have included this idea into my top 5 valentine's Day DIY ideas. Hope you like it! http://meivintage.blogspot.com/2013/02/diy-ideas-for-valentines-day.html

    ReplyDelete
  102. Hello I want to know if instead of use in this Mod Dodge can I use Gesso? IS THE SAME?? thanks!

    ReplyDelete
  103. I want to know if i can use gesso instead of Mod thanks!! I want to do this is very easy and cute! :)

    ReplyDelete
  104. we really enjoyed your article, thanks for sharing and more power!

    ReplyDelete
  105. Hi I just did it!!! so simple! very time consuming, but cheap and fun! can't wait to wear it! thanks for the fabulously simple tutorial!
    love,
    ariella
    www.glitterartfit.blogspot.com

    ReplyDelete
  106. I'm definitely doing this tomorrow! Screen printing sparked my interest when I was working at Michael's but the equipment was too expensive. This is fabulous!

    ReplyDelete
  107. That's quite a nice idea! I think it could be fun to invite some friends an do this in a group. Everyone can think of a different design but you can get inspired by your friends as well. Thanks for charing!

    ReplyDelete
  108. Hi Lauren,

    Thank you for showing us how to make screen printing at home!
    The result is amazing!

    I will try it myself soon!

    http://tailorspy.blogspot.gr/

    ReplyDelete
  109. I participate in a lot of charity walks and want to make team t-shirts, this is going to save me a lot of time and money this year!!!! Thank you for posting!!!!

    ReplyDelete
  110. It is nice and excellent collection of variety of t-shirts.It is a good design of t-shirts and to wear.Kids will like very much this kinds of t-shirts.design a tshirt

    ReplyDelete
  111. Does anyone know if you could use a vinyl stencil on the nylon instead of the modpodge? That would make it sooo much easier

    ReplyDelete
  112. Discover online the sporty and fashionably designed Gaastra t-shirts for
    men in various colours made from top-quality and hard-wearing cotton.
    Stylist T-Shirt Shop

    ReplyDelete
  113. I dont have mod podge.. wat else can I use in its place??

    ReplyDelete
  114. Digital T-Shirt Printing is a site, where you can designe your T-Shirt.
    You can also find the sporty and fashionable designed gaastra T-Shirts for men and also available for women. Good News for you that we are open for business!
    Both online and local.. So, You can easily choose and also buy our product very easily.
    Happy Shopping....!!!

    ReplyDelete
  115. Love this idea!!! Totally interesting!!! Printing your own shirt designs.

    ReplyDelete
  116. Trying today!! If it goes well, you have saved Big Brothers Big Sisters some money which is wonderful since we are non profit <3 :)

    ReplyDelete
  117. This is cool. so great. I want to do it also. Thanks

    online deals

    ReplyDelete
  118. I'm definitely going to try this with my kids. Thanks for the tutorial.

    ReplyDelete
  119. Brilliant! Thanks for this. Can't wait to give it a shot. I am really curious to see if the screen will hold up to multiple uses.

    ReplyDelete
  120. Awesome idea I like Your T-shirt now :D

    ReplyDelete
  121. This is a great tutorial!! I'm working on a shirt at this very moment, how long do you think I need to wait for the paint to dry before adding a second layer? (I'm working with different colours one on top of the other)
    thanks a lot!!

    ReplyDelete
  122. Kurva jóóóóóóóóóóóóóóóóóó :)

    ReplyDelete
  123. i cant find any mod podge in my place... is there any substitute to it?

    ReplyDelete
  124. You made a really nice screen printing t shirts. I really like your blog and t shirts.

    ReplyDelete
  125. How does the paint hold up when washed?

    ReplyDelete
  126. can i use a substitute for mod podge. i live in india and we dont have this product

    ReplyDelete
  127. I just saw this tutorial when it was tweeted by Amy Anderson of modpodgerocks.tumblr.com and I'm so excited to try it myself... I even have everything I need on hand ~ woo-hoo!

    Thank you, Lauren!

    ReplyDelete
  128. I think Cheaptees.org is one of the best and basically tees printing company. Cheaptees.org uses only the softest most comfortable fabrics with all our apparel manufactured and presents quality services.

    ReplyDelete
  129. For a disposable "one of a kind" design stencil I'd use just simple white Elmer's glue - because the point, I believe, is to cover the net so it does not let paint through, but Elmer's is not waterproof and stencil won't be washed. However, ModPodge seem to be washable after stencil has been used, and is great for multiple prints.

    ReplyDelete
  130. I've never done this kind of thing before but the ideas are endless. Thank you. I'll be storing this idea for the future.

    ReplyDelete
  131. WOW! I love your simple and easy steps on how to screenprint your tee to what you want it to look like and say. I can't say it enough ... super easy super easy super easy! Did I mention fabulous! Can't wait to try it on my shirts!

    ReplyDelete
  132. I would love to do this with my preschool art class! Do you think the stencil will work if it's damp? I will have to rinse out the color from the previous student and quickly use it again.

    ReplyDelete
  133. Nobody can reject the info you have given in the blogs, this is actually a great work.

    cheap t-shirtz

    ReplyDelete
  134. Can you reuse the same screen from shirt to shirt if making multiple if the same? Looking to use this for a family reunion!

    ReplyDelete
  135. Wow, awesome blog, thanks for the article.

    funny t shirts

    ReplyDelete
  136. I really like how easy you made that look. I wish that I could print my own t shirts whenever I felt like it. I probably wouldn't get a heart on it, but I would put a cool sword coming out of flames or something. You know, something manly. http://www.mountainscreenimpressions.com/screen-printing.html

    ReplyDelete
  137. Hi, nice post. This is an interesting and very informative blog. Thanks for sharing your ideas. Good blogs style too.All over T shirt Printing

    ReplyDelete
  138. I am in the need of some printed t shirts. I have a few designs I want to try out and to see what they look like. I have never done this before so I would have to get some help on it for sure. http://www.medertees.com/

    ReplyDelete
  139. I love the look of screen printed t shirts! Great article, I remember I used to do screen printing back in high school as well. I was always making t shirts for kids in my classes. I don't have the material to still do it anymore unfortunately.
    http://www.medertees.com/

    ReplyDelete
  140. I always like your blog post because you always comes with different ideas and information. I always shared your site post with my friends. Keep posting and i will follow you.

    custom apparel

    ReplyDelete
  141. Would you mind if I referenced this on my site? Doing a blog post about a similar topic and I think it would link well.

    Amela
    T-shirt printing Milton keynes

    ReplyDelete
  142. This comment has been removed by the author.

    ReplyDelete
  143. Great Design! forest and lakes offers free blank t-shirts for fashion designer to DIY or Screen Printing! If intested, please contact with nina@forestandlakes.com

    ReplyDelete
  144. I love this DIY! It's a very creative use of the embroidery hoop. Do you have any embroidery DIY projects? I know it's a bit more difficult but I've always wanted to try. I do like a challenge! Thanks for sharing your ideas and tricks with us, this was very helpful! http://www.mountainscreenimpressions.com

    ReplyDelete

Calico skies All rights reserved © Blog Milk - Powered by Blogger